Reverse Osmosis equipment

Reverse osmosis equipment is a process that passes raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it with a pump. It uses a reverse osmosis membrane (RO membrane) with a pore size of 1/10000 μ m (equivalent to 1/6000 the size of Escherichia coli and 1/300 the size of a virus) to convert high concentration water into low concentration water. At the same time, it isolates all impurities such as industrial pollutants, heavy metals, bacteria, viruses, etc. that are mixed into the water, thereby achieving the physical and chemical indicators and hygiene standards required for drinking. It produces clean to pure water, which is the best choice for the human body to supplement high-quality water in a timely manner. Due to the high purity of water produced by RO reverse osmosis technology, which is currently the highest among all water production technologies mastered by humans, the cleanliness is almost 100%. So people call this type of water production machine a reverse osmosis purified water machine.

1. Power industry: boiler feedwater

2. Electronics industry: semiconductor industry ultrapure water, integrated circuit cleaning water

3. Food industry: drinking purified water, formula water, production water, washing water

4. Pharmaceutical industry: process water, formulation water, washing water, injection water, drug concentration and separation

5. Chemical industry: production process water, wastewater treatment, concentration and separation of valuable substances

6. Drinking water engineering: water desalination, pure water preparation, drinking water purification

7. Desalination of seawater: production and domestic water use in island areas, coastal water scarce areas, ships, seawater oil fields, etc

8. Reclaimed water: suitable for electronic factories, circuit board factories, chemical plants, etc.

Application scope:

Technical Parameter

Inlet water temperature

5-45°C

Inlet turbidity

≤ 1.0 NTU

Residual chlorine value

≤ 0.1 mg/L

≤ 5-10μs/cm

System recovery rate

75-85%

Power supply voltage

220V/380V 50HZ

Inlet pH

4-10

Inlet SDI

≤ 4.0 SDI

Operating pressure

0.8-1.5MPa

Conductivity

System productivity

0.5-120T/H (according your order)

Pure water system

© 2024 Guangdong Nuopu Environmental Protection Technology Ltd. Trademarks and brands are the property of their respective owners.

CEDI (Continuous Electrodeionization)

Water treatment consumables

Tel
WeChat